Skip to content

From CAD to CNC: Preparing Fabrication Data for Aluminum Facade Panels

By Dmitry Lubarsky 2 min read Updated

On this page

A fabricator receives neat shop drawings for an aluminum cassette facade with a few hundred panels. The drawings are correct, but the router, press brake and saw cannot use them. Someone has to turn them into data a machine can run, and that step is where many projects pick up errors that only appear weeks later on site.

Drawings for people, data for machines

Shop drawings show a panel in views and sections so a person can understand and check it. A CNC router needs exact geometry placed on a sheet, with each line assigned to an operation: cut through, rout a groove for folding, drill a hole. The saw needs a list, not an assembly drawing.

What the machines need

  • Flat patterns: each cassette unfolded, with fold lines on the right routing tool. For composite panels the fold is a groove routed through the back skin and core. Sheet thickness and fold allowance change the pattern, so generate it from the panel definition rather than drawing it.
  • Cut lists: profile code, length, end angles and quantity for every bar, grouped so they work at the saw and at the assembly table.
  • Hole positions for fixings, drainage and pressure plates.
  • 3D STEP files for brackets and machined parts.

Where errors come from

When this data is retyped from PDFs, the usual problems are an old revision still in use, a transposed number, two look-alike panels with the same mark, or a late change that never reached the nested sheet. A wrong length is rarely noticed at the saw. It shows up during assembly, or later, when a panel does not fit its position on the building and the installation crew is already on site. By then, fixing it costs far more than getting the data right would have.

Generating data from the model

The fix is to produce machine data from the same model as the drawings. Aluvision, a facade engineering studio, prepares CNC-ready facade fabrication data this way, so one change updates drawings and machine files together.

Clean data also improves nesting, the layout of panels on standard sheets to reduce offcuts. On a facade with many panel sizes, good nesting can noticeably cut the number of sheets ordered, but only if the flat patterns are exact. An error in one pattern repeats on every sheet. Keep finish direction in the nesting rules: metallic and anodized finishes can look different when a panel is rotated.

Before files go to the machine

  • Every file carries the same revision as its drawing.
  • Each part has one ID in the model, drawings, CAM files and labels.
  • Cut, route and drill operations are on the correct tools.
  • Hole positions were regenerated after the last profile change.

CNC machines are precise. The weak point is the data that reaches them. Generate drawings and machine files from one model, and that precision shows up on the building.